print head, sublimation printing, nozzle tips, sublimation machine, subtextile, textile, 3D printing
As we know, the print head corresponds to a printer is the most important part. And normally a print head also cost much if damaged accidentally. So we need to be cautious when installing a new sublimation printer. Today I will give you guys some tips about how to avoid damaging to the print head when the installation.
1. When replacing the installation nozzle, the printer should be shut down in a power-off state, and the static electricity on the hand should be eliminated in advance.
2. The nozzle is the core component of the printer. Handle it gently to avoid bumping. Do not touch the surface and circuit of the nozzle during installation.
3. When installing and connecting the nozzle to the data cable, please pay attention to the front and back. Make sure that the metal part of the data line is exactly connected with the metal point at the nozzle slot. Make sure that it is not tilted or loose after insertion.
4. If the data cable is not inserted correctly, check the metal part of the data cable after pulling out. If there is any lifting or damage, you must replace the new data cable.
5. After the nozzle is installed, do not run the power. First, gently move the car to the left and right to confirm that the position of the nozzle is correctly installed. No card is touched. After confirming, push the car back to the ink pad and turn it on again.
If you need the print head, now you can find in our Subtextile. We offer Mimaki, Epson, Ro-land original/second-hand print head!
Subtextile Co. Ltd
Add: East Street No.7-2 ,Waisha Village, Baguazhou, Qixia District, Nanjing City, JiangSu Province, China
P.C:213000
Export office:
699-18, Xuanwu Blvd, Nanjing City,Jiangsu, China
P.C:213000
Tel:+86 025 85416407 (GLOBAL)
Fax:+86 025 85416407 (GLOBAL)
Cell:+86 17798509616
What'sapp: 0086 17798509616
E-mail:[email protected]