News Category

How to solve UV Printer common problems about printhead

As we know UV printer is a high-tech, free-form full-color digital press that is color-free and can be used for color photos on T-shirts, sliding doors, doors, glass, signs, crystals, PVC, metal, plastic, leather printing. 
It is easy to operate and  resistant to wear, so more and more popular in industry but the print head is a big problem for many customers, which affecting the print effect. So Subtextile has sorted out 3 common causes and corresponding solutions for UV universal flat-panel printers.

Cause 1: Too much impurities cause the nozzle to clog. If the UV printer hasn't use for a long time or without using the original sublimation ink, the nozzle needs to be cleaned. If not works also, the nozzle can only be removed, soaked in purified water at about 50-60℃, cleaned with an ultrasonic cleaner, and dried after use. 
Cause 2: the distance between the UV printer sprinkler head and the substrate is too high and the reasonable height is generally below 15cm. If the sprinkler head beyond the scope of its spray will cause the phenomenon of flying ink. Solution: reduce the distance between the sprinkler head and substrate.
Cause 3: the voltage of the UV printer sprinkler head is too high. If so the voltage of the nozzle needs to be reduced. Solution: if the circuit board is modified, the circuit can be changed.

Subtextile just arrived a new UV printer adopting 4-layers printing technology, which enable the backlight patterns change magically. The fast printing speed will save more time for you. Click here to check details!
What’s app: +86 17798509616